Fastest read Fastest write. If your power supply does not include a SATA power connector, you will need an adapter. The DDR2 Voltage option controls the power supplied to your memory modules, with an allowed maximum of 2. Capacity of 1 hard drive. The biggest shortfall here is the lack of configurable voltage options, without which many of the provided FSB overclocking options become useless.
|Date Added:||15 August 2018|
|File Size:||56.28 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Switching modes may cause an “NTLDR” error, an immediate blue screen error followed by a reboot, or other boot failure. Fast read Non-optimized write. The biggest shortfall here is the lack of configurable voltage options, without which many of the provided FSB overclocking options become useless. While the Serial ATA controller may be operating at a higher transfer speed, it may claim to be operating in a slower parallel ATA transfer mode. F6 Driver Disk Note: Fastest read Fastest f925xecv2.
Supported Processors for the Intel® Desktop Board DXECV2
The Hardware Monitoring submenu contains real time statistics for all BIOS monitored voltages, system temperatures, and fan speeds. Make sure you have the latest BIOS version for your desktop board.
The DDR2 Voltage option controls the power supplied to your memory modules, with an allowed maximum of 2. Better read Slightly degraded write. Note the presence of an Auxiliary Power option. With the Extended Burn-in Mode setting Enabled, you are allowed a higher degree of leeway with the overclocking parameters on the board.
For command rate, the options available are Auto, Enabled, and Disabled.
The Memory submenu, selectable from within the main Chipset Configuration submenu, contains all memory FSB, timing, and voltage options. RAID 5 with write-back cache. Optical drives generally top out at about 22 Intek for reads and When you press F6, daid may appear as if nothing happened as a dialog box will not appear and you will not immediately see a prompt.
Go to the Boot menu. Ibtel Enhanced setting allows for the full 6 device maximum. Combined capacity of all hard drives minus 1. Switch the Drive Mode option from Legacy to Enhanced. To install a hard drive larger than gigabytes on your computer you need Windows Service Pack 3 or later or Windows XP Service Pack 1 or later. These numbers aren’t meaningful to optical drives. With a USB hard drive connected to the system, the device will show as a selectable option within the pull down drive list under the Hard Disk Drives submenu.
Fast read Fast write. News [H]ard Forum Settings.
The Advanced tab contains a series of submenus for control and configuration of all aspects of board functioning, including drive, video, memory and chipset configuration. Save and exit the Bios Setup.
Pentium 4 3.46 Extreme Edition and 925XE: 1066MHz FSB Support is Here
Capacity of 1 hard drive. The Chipset Configuration submenu contains options for controlling chipset related functions, raic memory timings and voltages, as well as various system bus speeds to a limited extent. Select the Advanced menu, then the Drive Configuration menu.
Instead, later during Windows Setup, however, you will be prompted to insert the RAID driver floppy disk that came with the desktop board. However, these speeds are relevant only to hard drives.
The Boot tab contains all options for configuring system boot up related activities. Read on to find out how this new kid on the block does against its more established brethren. All trademarks used are properties of their respective owners.